Complete Starter Kit for Your Smartflow Water Softener

This package includes everything you need to quickly and easily set up your Smartflow water softener.

Smartflow Installation Kit
All the necessary components for proper installation of the water softener. The kit includes hoses, clamps, an adjustable check valve, and a water trap, making it easy for you or your plumber to install the system.

Brita Hardness Test
A practical tool for measuring your water hardness. The test helps you fine-tune the system for optimal and efficient performance.

25 kg Smartflow Crystal Salt
Crystal salt is essential for the operation of the water softener. It regenerates the system’s ion exchanger, effectively removing lime from the water. With 25 kg of salt, you are well-equipped to start enjoying limescale-free water.

Total Hardness Test from BRITA, used to measure the hardness of your drinking water.

Can also be used in connection with water softening systems, so you can calculate the capacity based on the result obtained.

Instructions:

Fill the test tube with 5 ml of water, then add the hardness test drop by drop until the water changes color from red to green. At the first drop, the water turns red, then you count the number of drops until the water changes color to green.

Water hardness (dH):

0-4 drops = Very soft

4-8 drops = Soft

8-12 drops = Medium hard

12-18 drops = Fairly hard

18-24 drops = Hard

Keep your water softener in top condition with this effective Resin Cleaner.
The cleaner removes dirt, limescale, and iron from the ion exchange resin, ensuring your system maintains full performance and delivers soft water every day.

Benefits:

• Cleans the ion exchange resin from dirt and sediment
• Effectively removes iron and limescale
• Extends the lifespan of your water softener
• Contains 3% phosphoric acid, which dissolves iron oxide and converts it into iron phosphate that easily rinses away during regeneration

The detailed procedure can be found in the manual under the Documents section further down this page.

Instructions:

• Pour 2.5 liters into the salt tank.
• Start a regeneration by pressing the right arrow on your Smartflow water softener.
• Repeat the process after 14 days.

Smartflow installation kit to get your Smartflow started.

Hosing in this package is for drain usage, not drinking water outlet.

Bypass For Smartflow Water Softener

Power adapter for Smartflow water softener

Overflow assembly for Smartflow water softener 125/250