Accessories

Vana Slim filter housings with brass inserts and transparent swamp.

You can use the filter housing regardless of whether you get your water from your local waterworks or from your own well drilling.

With a flow of 15 l / min, this kit is suitable for households with 1-2 people.

Total dimensions:

• Height: 174 mm
• Width: 128 mm
• Connection ¾”
• Maximum working pressure 8 bar.

The housings and elements are made of food approved and BPA-free materials.

Vana Slim filter housings with brass inserts and transparent swamp.

Vana Slim filter housing is for you who want an effective filtration solution for your water.

You can use the filter housing regardless of whether you get your water from your local waterworks or from your own well drilling.

With a flow of 28 l/min, this kit is suitable for households with 2-4 people.

Total dimensions:

Height: 294 mm
Width: 128 mm
Connection ¾”
Max working pressure 8 bar.

The houses and elements are made of food-approved and BPA-free materials.

Vana Slim filter housings with brass inserts and transparent swamp.

Vana Slim filter housing is for you who want an effective filtration solution for your water.

You can use the filter house regardless of whether you get your water from your local waterworks or from your own well drilling.

With a flow of 56 l/min, this kit is suitable for households with 4-6 people.

Overall dimensions:

Connection ¾”
Max working pressure 8 bar.

The houses and elements are made of food-approved and BPA-free materials.

Wrench for Vana Slim Filter Housings.

For an easier access and changing of filters.

Easy steps to changing the filter:

• Shut the water off.
• Open a faucet to let out access water.
• Open the vent valve.
• Insert the key from below and twist slowly to open the filter housing and take out the used filter.
• Clean/wipe the glass and insert new filter.
• Close and softly tighten the housing using the key.
• Slowly open the water again and when the air is out, shut off the faucet and carefully open the vent valve to let out any remaining air.

Ready to go!

We always recommend changing the filters every 6 months to avoid bacteria growth in the filters and to ensure the best efficiency. Please note, that depending on the water quality it may vary how often it needs changing.

Vana Pleat 5" water filter fits Vana Slim 5" filter housing. 

Surface filter made from polyester and polypropylene.

This is the standard type filter element with high dirt holding capacity and good efficiency.

Choose your filtration rate based on your application.

• 0,5 µm: Fine filtration. Not recommended without 5 µm prefiltration. Use this filter to retain fine particles.
• 5 µm: Standard filtration. Removes most common particles in the water and protects the rest of the line.
• 20 µm: Coarse filtration. Use this filter if you have especially large particles in your water and you experience blocking with a 5 µm filter.

The filter should be replaced every 6 months to prevent bacteria growth in the filter. 

Vana Pleat 9¾" water filter fits Vana Slim 9¾" filter housing. 

Surface filter is made from polyester and polypropylene.

This is the standard type filter element with high dirt holding capacity and good efficiency.

Choose your filtration rate based on your application.

• 0,5 µm: Fine filtration. Not recommended without 5 µm prefiltration. Use this filter to retain fine particles.
• 5 µm: Standard filtration. Removes most common particles in the water and protects the rest of the line.
• 20 µm: Coarse filtration. Use this filter if you have especially large particles in your water and you experience blocking with a 5 µm filter.

The filter should be replaced every 6 months to prevent bacteria growth in the filter. 

Vana Pleat 10" Jumbo water filter fits Vana 10" Jumbo filter housing. 

Surface filter is made from polyester and polypropylene.

This is the Jumbo filter element with high dirt holding capacity and good efficiency.

Choose your filtration rate based on your application.

• 0,5 µm: Fine filtration. Not recommended without 5 µm prefiltration. Use this filter to retain fine particles.
• 5 µm: Standard filtration. Removes most common particles in the water and protects the rest of the line.
• 20 µm: Coarse filtration. Use this filter if you have especially large particles in your water and you experience blocking with a 5 µm filter.

The filter should be replaced every 6 months to prevent bacteria growth in the filter. 

Vana Pleat 20" Jumbo water filter fits Vana 20" Jumbo filter housing. 

Surface filter is made from polyester and polypropylene.

This is the Jumbo filter element with high dirt holding capacity and good efficiency.

Choose your filtration rate based on your application.

• 0,5 µm: Fine filtration. Not recommended without 5 µm prefiltration. Use this filter to retain fine particles.
• 5 µm: Standard filtration. Removes most common particles in the water and protects the rest of the line.
• 20 µm: Coarse filtration. Use this filter if you have especially large particles in your water and you experience blocking with a 5 µm filter.

The filter should be replaced every 6 months to prevent bacteria growth in the filter. 

Vana Jumbo 10 "filter housing is recommended for you who have many people in the household who all want to use water without feeling any pressure loss. With an average flow of 80 l / min, a Jumbo 10" filter can handle approx. 5 faucets at full pressure simultaneously.

The filter housing is transparent so you can keep an eye on the condition of your filter element.

The filter housing thread is 100% tight and also relatively tight, so we recommend that you buy a key for installing filter elements.

Total dimensions:

• Height: 343 mm
• Width: 185 mm
• Connection 1”
• Maximum working pressure 8 bar.

The housings and elements are made of food approved and BPA-free materials.

If you have a very large water consumption, e.g. several households on the same well, the Vanas 20 "Jumbo filter is the most optimal solution. With an average flow of 150 l / min, one can handle up to 10 taps at the same time and the large filter elements can hold many particles before the element stops. .

The filter housing has glass in transparent plastic so you can keep an eye on how the element is doing.

Total dimensions:

• Height: 625 mm
• Width: 185 mm
• Connection 1½”
• Maximum working pressure 8 bar.

The housings and elements are made of food approved and BPA-free materials.