AQUAPHOR

AQUAPHOR

View as List Grid

Items 1-10 of 16

Page
per page
Set Descending Direction
  1. Crystal Install. Kit - JG 6mm to 3/8 BSP

    Everything you need to go from a filter with 6mm JG connections to 3/8" thread.

    This installation kit includes:

    • 1 meter hose
    • 2x 6mm JG to 3/8" fittings

     

    Avability:In stock
    €11.26
  2. Wrench for Gross Filter Housing

    Wrench for Gross Housing - Used to tighten and loosten the lid on Gross housings

    Avability:In stock
    €10.62
  3. AQUAPHOR Crystal DiPro - De-ionization System
    • Connection: 6mm JG (hose)
    • Capacity: 100 litres
    • Flow (l/min): 2
    • Max. Temperature: 38 °C

    NOT FOR DRINKING WATER!

    Compact demineralization water purifier
    — Equipped with the highest quality components
    — Including UF for bacteria removal
    — Robust construction and easy maintenance
    — Online TDS control
    — Modern design
    — Built and assembled in EU

    Benefits
    — Quick-changing filtration cartridges
    — Designed for deionizing water up to 16 megohms
    — Uses Cation and Anion resins (H+ and OH-) to remove Total Dissolved Solids (TDS).
    — Ultrafiltration membrane removes the particles larger than 0,1 µm.

    WARNING: For drinking water applications, do not use with
    water that is microbiologically unsafe or of unknown quality
    without adequate disinfection before or aſter the unit.
    CAUTION: Do not use cartridges on equipment that has an
    electric conductivity water level indicator.

    Tap water typically show typically 700 PPM
    Demineralized water typically shows about 70 PPM
    Distilled water 0-2 PPM.

    Avability:In stock
    €300.19
  4. O-ring - Gross 10" 20"

    O-Ring for 10" and 20" Gross housing.

    Avability:In stock
    €11.26
  5. Avability:In stock
    €199.95
  6. Regeneration Adapter - Crystal KH filter

    Regenerative adapter, for Crystal KH Cartridge only.

    KH Cartridge contains resin that removes limescale by means of ion exchange.
    With time and use, the resin will get saturated with limescale.

    To remove the limescale buildup from the resin you mix water with plenty of salt in a soda bottle, connect it with the assembled adapter, plug in to your KH cartridge and pump the saltwater through.

    Avability:In stock
    €7.40
  7. Avability:In stock
    €1,058.72
  8. Avability:In stock
    €469.06
  9. Avability:In stock
    €58.97
  10. Avability:In stock
    €192.98
View as List Grid

Items 1-10 of 16

Page
per page
Set Descending Direction