Water filter for water coolers
Every day, we drink a lot of water which has been cooled by a water cooler; however, in many cases, the water has not been free of particles and bacteria. This also means that the water is not always completely bright, especially due to the content of limestone. With a filter for your faucet or cooler, you will not only get pure water, but indeed crystal-clear water.
Taps & Watercoolers
- Brita C50 Fresh - Active Carbon Filter - 12000 liters
The PURITY Fresh C50 was specially developed for soft water areas with a high particle density in the water. The activated carbon mixture reliably keeps these particles away from the machine and end product, ensuring a clear fresh taste. In addition, the machine is optimally protected.
As a result, the PURITY Fresh C50 reduces a large part of significant negative influences, which can be caused by properties of the water.Avability:In stock€78.94
- Brita Purity C1000 AC Active Carbon Filter - 10000 liters
With its activated carbon block, the PURITY C1000 AC reliably retains residues in the water that can negatively affect the taste, aroma or appearance of the end product. With the particularly fine pores of the carbon block, even the smallest particles (down to 0.5 µm) are prevented.
Typical application areas for the PURITY C1000 AC technology are point-of-use water dispensers and vending systems.Avability:In stock€53.49
- 3M ScaleGard P115-E - 600 liters - 0% Bypass
Well suited as Quooker Filter
ScaleGard Pro is the 3M series of lime filters for professionals. The filters yield using ion-exchange technology the calcions with salt ions. Not only does the filtration protect your kitchen appliances from lime and particles, but it also optimizes the taste for e.g. coffee brewing.
The filter must be mounted in a VH3 filter head.Avability:In stock€69.70
- 3M ScaleGard P124BN-E - 1600 liters - 25% Bypass
Filter only. Heads sold separately.
ScaleGard Pro is the 3M series of lime filters for professionals.
The filters yield using ion-exchange technology the calcions with salt ions. Not only does the filtration protect your kitchen appliances from lime and particles, but it also optimizes the taste for e.g. coffee brewing.
The filter must be mounted in a VH3 filter head.Avability:In stock€109.55
- 3M ScaleGard P195-E - 2850 liters - 0% Bypass
Cartridge only. Head is bought separately.
ScaleGard Pro is 3M's series of lime filters for professionals.
The filters, using ion-exchange technology, yield the turkeys with salt ions. Not only does the filtration protect your kitchen machines against lime and particles, but it also optimizes the taste for e.g. coffee brewing.
The filter must be mounted in a VH3 filter head.Avability:In stock€158.95
- 3M AP3 filter C765-S-E - Activated Carbon
AP3 is an active carbon filter with built-in calcium encapsulation and 0.5 µm filter membrane.
The filter encapsulates lime particles and prevents them from settling on surfaces, while the activated charcoal improves the taste and smell of the water.
The AP3 is designed for mounting under the sink or close to where you need the water.
For best filtration, it is recommended to use the filter only on a single tap.Avability:In stock€72.50
- 3M AP3 filter C762-M - Bacteria reduction
Filter only. Heads sold separately.
AP3 is an activated carbon filter with a built-in 0.2 µm filter membrane.
The filter membrane retains 99.99% of bacteria in the water and the activated charcoal improves taste and smell.
The AP3 is designed for mounting under the sink or near where you need the water.
For best filtration, it is recommended to use the filter only on a single tap.Avability:In stock€168.08
The significance of a water cooler filter
Frequently, a water cooler is to be found in a workplace, used by several people. This also means that the requirements are high when it comes to the consumption and application of the machine. The consumer expects pure and cold water, just as it will not take a lot of time to get the water. The filter can meet the requirements of different expectations for your water cooler. For instance, a filter which retains all limestone will make the water flow from the faucet in proper quantities, because the faucet will not get calcified and cluttered.
Removing all limestone does not only affect your machine; it also enhances your experience of drinking the water. The water will enhance its brightness abundantly, while getting an improved taste. This will make your employees want to drink the water even more, which ultimately improves the work efficiency.
Different water-cooling filters for different needs
We deal in different water-cooling filters, depending on the needs of the specific machine. If you experience limestone and bad taste in your water, we recommend that you take a look at our 3M AP3 filter, which both encapsulates the limestone and contains activated carbon. Moreover, you must buy a filter head, which is attached to the filter. Once the filter needs to be removed, you only remove it from the filter head and replace it with a new filter. That way, you do not have to dismantle the entire installation.