Bacteria - UV Filter

Filter only. Heads sold separately.

AP3 is an activated carbon filter with a built-in 0.2 µm filter membrane.

The filter membrane retains 99.99% of bacteria in the water and the activated charcoal improves taste and smell.

The AP3 is designed for mounting under the sink or near where you need the water.

For best filtration, it is recommended to use the filter only on a single tap or tap.

These compact, single lamp systems are designed for smaller commercial applications, providing effective microorganism control in point-of-use applications such as private drinking water and tank-loop systems.

• Supplied with power ballast including audible and visual alarm
• Single lamp design for simple maintenance
• High quality stainless steel reactor chamber
• Reliable operation, ensuring low on-going costs
• Effective and economic bacterial / microbial protection

Effective pre-filtration is essential before a UV system to maximise the exposure of microorganisms to disinfecting UV light.

Organisms attached to suspended solids, such as dirt, sediment and debris, can be protected from UV light as they pass through the system by a phenomenon known as ‘shadowing’. We recommends using five micron pre-filtration prior to all UV system installations, to reduce the possibility of shadowing and optimise system performance.

These compact, single lamp systems are designed for smaller commercial applications, providing effective microorganism control in point-of-use applications such as private drinking water and tank-loop systems.

• Supplied with power ballast including audible and visual alarm
• Single lamp design for simple maintenance
• High quality stainless steel reactor chamber
• Reliable operation, ensuring low on-going costs
• Effective and economic bacterial / microbial protection

Effective pre-filtration is essential before a UV system to maximise the exposure of microorganisms to disinfecting UV light.

Organisms attached to suspended solids, such as dirt, sediment and debris, can be protected from UV light as they pass through the system by a phenomenon known as ‘shadowing’. We recommends using five micron pre-filtration prior to all UV system installations, to reduce the possibility of shadowing and optimise system performance.