Gross Filter

Gross filter house

Gross filter houses correlate with gross filters, which are eligible pre and post filters for additional filtration methods, such as central filtrations or reverse osmosis facility. The filters have been manufactured for specific materials, which are not intercepted by other filtration methods, e.g. iron or taste and smell (activated carbon).

Gross filter houses come in two sizes, 10” and 20”, just as the other filters. The smallest ones can endure a flow of 80 liters of water each minute, whereas the biggest ones can endure 150 liters of water each minute.

Gross Filter

View as List Grid

3 Items

per page
Set Descending Direction
  1. Gross 10" Filterhousing - 1" - incl. 5my Filter
    • Dimensions: 180 x 185 x 360 (DxWxH) mm
    • Flow (l/min): 80
    • O-ring Material: EPDM
    • Max. Pressure: 6,3 bar
    • Max. Temperature: 38 °C
    • Material (Housing): Polypropylene
    • Connection: 1"
    • Size: 10" Jumbo

    This package contains:


    Filter-housing
    Filter-element (5my depth-filter)
    Wrench for filterhousing
    Wall-bracket


    All in the box

    Avability:In stock
    €66.65
  2. Gross 20" Filter housing - 1" - incl. 5my filter
    • Dimensions: 180 x 185 x 610 (DxWxH) mm
    • Flow (l/min): 150
    • O-ring Material: EPDM
    • Max. Pressure: 6,3 bar
    • Max. Temperature: 38 °C
    • Material (Housing): Polypropylene
    • Connection: 1"
    • Size: 20" Jumbo

    This package contains:

    • Filter-housing
      Filter-element (5my depth-filter)
      Wrench for housing
      Wall-bracket

    All in the box

    Avability:In stock
    €83.31
  3. Gross 20" Dybdefilter EFG112/508 - 5µm
    • Element Size: 20" - Gross (Jumbo)
    • Filtration Rate (micron): 5 µm
    • Max. Temperature: 38 °C
    • Filter Media: Polypropylene

    Gross depthfilter cartridge

    Depthfilter made from meltblown polypropylene.

    This is the standard type filter element with high dirt holding capacity and good efficiency.

    Choose your filtration rate based on your application.

    • 1 µm: Fine filtration. Not recommended without 5 µm prefiltration. Use this filter to retain fine particles.
    • 5 µm: Standard filtration. Removes most common particles in the water and protects the rest of the line.
    • 20 µm: Coarse filtration. Use this filter if you have especially large particles in your water and you experience blocking with a 5 µm filter.

    The filter should be replaced every 6 months to prevent bacteria growth in the filter. 

    Avability:In stock
    €22.36
View as List Grid

3 Items

per page
Set Descending Direction

Different Gross filters

We deal in three different gross filters (2 x depth filters, 2 x activated carbon and an iron filter). They are all filtered down to 5 µm, which corresponds to a normal filtration, during which the most common particles are being removed. The filters need replacing every six months for the optimum efficiency.

These filters cannot work alone but require a large facility in a well-established setup. For example, the filters are not big enough to manage a household’s water supply alone, which is why we recommend that they are either applied before or after the main filter. An essential detail is that these filters have been food approved, which is also why they may usually be located in business purposes.