Standard Plastic Filterhousing

Plastic filter house slim

When you buy a filter, it is also important to find the right filter house, in which materials can be stored, which are retained by the filter. Moreover, the filter house is important as the filter needs to be stored in a way that it is kept clean from non-relevant particles from the air.

Standard Plastic Filterhousing

View as List Grid

5 Items

per page
Set Descending Direction
  1. Vana Slim 5" Filterhousing - 3/4" - 15 l/min
    • Flow (l/min): 15 (1 vandhane)
    • O-ring Material: NBR
    • Max. Pressure: 8 bar
    • Max. Temperature: 50 °C
    • Material (Housing): Polypropylene / SAN
    • Connection: 3/4"

    FP2 filter cartridge housings with brass inserts and transparent SAN sump or opaque white sump.

    Avability:In stock
    €27.86
  2. Vana Slim 9¾" Filterhousing - 3/4"
    • Flow (l/min): 28 (~ 2 vandhaner)
    • O-ring Material: NBR
    • Max. Pressure: 8 bar
    • Max. Temperature: 50 °C
    • Material (Housing): Polypropylene / SAN
    • Connection: 3/4"
    • Recommended Working Temperature (°C): 50

    FP2 filter cartridge housings with brass inserts and transparent SAN sump or opaque white sump.

    Avability:In stock
    €33.91
  3. Vana Slim 9¾" Filterhousing - 3/4" - 90°C
    • Flow (l/min): 28 (~ 2 vandhaner)
    • O-ring Material: VITON
    • Max. Pressure: 8 bar
    • Max. Temperature: 90 °C
    • Material (Housing): PBT+FV
    • Connection: 3/4"

    ! MUST ONLY BE ASSEMPLED WITH SEALING-TAPE !
    ! Do not use sealing-yarn as it may crack !

     

    Professional Housing for extreme working condition. Made of glass-reinforced high quality thermoplastic polymer, Vana V10HT filter housings are a technical alternative to Brass and Stainless housings.
    These housings can withstand temperatures up to a maximum of 90°C and pressure up to 8 bar. Excellent chemical compatibility makes V10HT housings an ideal choice for a wide variety of industrial applications.
    High quality VITON® o-ring for a perfect sealing.
    • With In-Out high resistance thread BSP 3/4” female;
    • Excellent alternative to brass and stainless housings;
    • Suitable for all Vana cartridges;
    • Up to 90°C and 8 bar working condition.

    Avability:In stock
    Special Price €67.10 Regular Price €129.84
  4. Vana Slim 9¾" Filterhousing - 3/4" Full-PP
    • Flow (l/min): 28 (~ 2 vandhaner)
    • O-ring Material: VITON
    • Max. Pressure: 6 bar
    • Max. Temperature: 40 °C
    • Material (Housing): Polypropylene
    • Connection: 3/4"

    This professional version of the Vana V10 housing is made from 100% Polypropylene. This makes a housing that has a high chemical resistance as well as having no materials that are not approved for food contact. 

    The V10PP filter housing is recommended for any application where the media is not water. 

    Avability:In stock
    €41.63
  5. Vana Slim 20" Filterhousing - ¾"
    • Flow (l/min): 56 (~ 5 vandhaner)
    • O-ring Material: NBR
    • Max. Pressure: 8 bar
    • Max. Temperature: 50 °C
    • Material (Housing): Polypropylene / SAN
    • Connection: 3/4"
    • Recommended Working Temperature (°C): 50

    FP2 filter cartridge housings with brass inserts and transparent SAN sump or opaque white sump.

    Avability:In stock
    Special Price €29.86 Regular Price €43.06
View as List Grid

5 Items

per page
Set Descending Direction

All our plastic filter houses have in common that they have been manufactured in transparent plastic with a brass thread. This transparent plastic makes it possible for you to see any dirt being piled up in the filter house as the water runs through the filter. Thus, the filter does its job properly. In addition, the choice of materials is one of the reasons why this filter house could be sold at a fair price for ordinary households. The brass thread makes the filter house sustainable, while you avoid any leakages.

Which filter house corresponds to your needs?

When you look for the right filter and pertaining filter house, it is important to contemplate your specific needs. Our plastic filter houses slime are all designed for a maximum pressure of 8 bars and a maximum temperature of 50 Celsius. Therefore, it is in particular the flow of the filter house you should pay attention to as a consumer. In this regard, our plastic filter houses come in three different sizes, corresponding to one, two or five faucets, respectively. If you are in doubt as to what to choose, please do not hesitate to contact us. Together, we will find the proper filter house and filters for your needs.